Description
usage: For general use in dry locations, electrical equipment, distribution boards and switches, pipes buried under and over plaster, restrained by insulating fasteners, are used up to 750 V. Direct use of plaster is not allowed.
Description
Standard sources
- ISIRI 607-3
- VDE-0250
- IEC 60227-3
Usage temperature
-
Maximum 70 degrees Celsius
Nominal voltage
- For a conductor with a cross section smaller than 1mm2 equal to 300/500 volts and for a conductor with a cross section greater than 1mm2 equal to 450/750 volts
Conductor class
- Class 1 and 2 according to ISIRI 3084 national standard
usage
- For general use in dry locations, electrical equipment, distribution boards and switches, pipes buried under and over plaster, restrained by insulating clamps, are used up to 750 V.
- Direct use of plaster is not allowed.
Additional information
| Structure of layers |
Cu/PVC/PVC Cu/XLPE/PVC Cu/XLPE/PE Cu/XLPE/LSZH Al/PVC/PVC Al/XLPE/PVC Al/XLPE/PE Al/XLPE/LSZH |
|---|---|
| Cable structure |
Conductor material and class: annealed copper Class 1 (Meftoli), Class 2 (Semi-Fixed), Class 5 (Fixed), aluminum or aluminum alloys according to the national standard IEC 60228) ISIRI 3084) Insulation material: PVC type A or XLPE compound Insulation color: according to the customer's request. Coating material: PVC type ST1 and ST2 mixture, HDPE mixture or LSZH mixture. Coating color: according to the customer's request. |
| usage |
These types of cables can be used to supply electricity for fixed installation in the basement, ducts, facilities inside the building and in the open space where there is no possibility of mechanical damage to the cable. In places where there is a possibility of fire, LSZH materials are used to prevent the release of toxic gases and corrosive gases. |
